Dash Display System Gauge (Red)

This product can be used with any car or engine, although additional items may need to accompany it.

The new DDS3v10 can now perform more precise diagnostic analysis between high and low flow limits, user can set the two limits independently. The flow detection range can now be extended to 1800ml/min with the help of the "sensor calibration trimmer".

All DDS3 comes with the new wide-range flow sensor. Output capabilities has also been revised. It can automatically increase the boost pressure upon detection of correct water flow rate. A separate "map switch" output channel is added so user can switch to a safer map "on the fly" should water flow be interrupted during power run.

All those outputs can be cancelled by the user via the dash gauge on/off button. The DDS3 can now give user the full control of the power with a simple press of a button. A priming pump enable output is also available for those who wants to run trunk mounting tank so water delivery is assisted as the hose length is extended. A tank level sensor is supplied with the package, disabling the extend boost switch and "map switch" mechanism.

 The DDS3 can be used with other makes of WI systems, a triggering signal may be required to activate the "diagnostic" function of the DDS3.